home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga CD-ROM Collection
/
Amiga CD-ROM Collection - Auge 4000 and Cactus and Demo Util.iso
/
demoutils
/
38
/
devs
/
mountlist
next >
Wrap
Text File
|
1992-07-26
|
3KB
|
136 lines
NEWCON: Handler = L:Newcon-Handler
Priority = 5
StackSize = 1000
#
/* This is an example of an alternative type of non-filing device mount,
used to mount the non-buffered serial handler
*/
AUX: Handler = L:Aux-Handler
Stacksize = 6000
Priority = 5
GlobVec = -1
#
PIPE: Handler = L:ConHandler
Stacksize = 6000
Priority = 5
GlobVec = -0
#
/* This is an example of a non-filing system mount using a handler written
in C.
*/
SPEAKER: Handler = L:Speak-Handler
Stacksize = 6000
Priority = 5
GlobVec = -1
#
/* This is an example of a mount list entry for using the recoverable
ram disk. Depending on the amount of memory you wish to devote to
it, you may want to change the HighCyl value.
*/
CARD: Device = ramdrive.device
Unit = 0
Flags = 0
Surfaces = 2
BlocksPerTrack = 11
Reserved = 2
Interleave = 0
LowCyl = 0 ; HighCyl = 79
Buffers = 5
BufMemType = 1
#
VD0: Device = ramdrive.device
Unit = 0
Flags = 0
Surfaces = 2
BlocksPerTrack = 11
Reserved = 2
Interleave = 0
LowCyl = 0 ; HighCyl = 79
Buffers = 5
BufMemType = 1
#
VD1: Device = ramdrive.device
Filesystem = l:FastFileSystem
Unit = 1
Flags = 0
Surfaces = 2
BlocksPerTrack = 11
Reserved = 2
Interleave = 0
LowCyl = 0 ; HighCyl = 39
Buffers = 25
BufMemType = 1
#
/* Mount a 5.25" disk drive to be mounted as DF2: */
DF2: Device = trackdisk.device
Unit = 2
Flags = 1
Surfaces = 2
BlocksPerTrack = 11
Reserved = 2
PreAlloc = 11
Interleave = 0
LowCyl = 0 ; HighCyl = 39
Buffers = 20
BufMemType = 3
#
/* An example mount entry using the fast file system with a partition
of the hard disk using the 2090 disk controller. PREP has been
used to create the first partition (up to cylinder 20). The second
partition is MOUNTed, using the following entry:
(The hard disk is not included; this is only an example.)
*/
FAST: Device = hddisk.device
FileSystem = l:FastFileSystem
Unit = 1
Flags = 0
Surfaces = 4
BlocksPerTrack = 17
Reserved = 2
Interleave = 0
LowCyl = 21 ; HighCyl = 800
Buffers = 30
GlobVec = -1
BufMemType = 1
#
/* Let's say you have an A2000 with an internal drive, and an external
drive, and you want to refer to the external drive as DF1: as well
as DF2: Well, this MountList entry will do it for you. This technique
can be extended to provide you with a drive A: and B: if you really
want.
*/
DF1: Device = trackdisk.device
Unit = 2
Flags = 1
Surfaces = 2
BlocksPerTrack = 11
Reserved = 2
PreAlloc = 11
Interleave = 0
LowCyl = 0 ; HighCyl = 79
Buffers = 20
BufMemType = 3
#